Manual

The complete WEST reference for input parameters.

Note

Not all input parameters listed below are mandatory. Check Quick Reference or Tutorials pages to see examples of input files.

See also

WESTpy is a Python package, designed to assist users of the WEST code in pre- and post-process massively parallel calculations. Click here to know more.

See also

The input file is given according to the YAML Notation (https://yaml.org/).

input_west

qe_prefix

Type	string
Default	“pwscf”
Description	Prefix prepended to the Quantum ESPRESSO save folder.

west_prefix

Type	string
Default	“west”
Description	Prefix prepended to the WEST save and restart folders.

outdir

Type	string
Default	“./”
Description	Directory for: input, temporary, and output files.

wstat_control

wstat_calculation

Type	string
Default	“S”
Description	Available options are: “S” : Start from scratch. “R” : Restart from an interrupted run. You should restart with the same number of cores, and images. “E” : Calculation of the response is external, i.e. outsourced to a server.

n_pdep_eigen

Type	int
Default	dynamically set to match the number of electrons
Description	Number of PDEP eigenpotentials.

n_pdep_times

Type	int
Default	4
Description	Maximum dimension of the search space = n_pdep_eigen * n_pdep_times.

n_pdep_maxiter

Type	int
Default	100
Description	Maximum number of iterations in PDEP.

n_dfpt_maxiter

Type	int
Default	250
Description	Maximum number of iterations in DFPT.

n_pdep_read_from_file

Type	int
Default	0
Description	Number of PDEP eigenpotentials that can be read from file.

n_steps_write_restart

Type	int
Default	1
Description	Available options are: If ( n_steps_write_restart > 0 ) A checkpoint is written every n_steps_write_restart iterations in the PDEP loop. If ( n_steps_write_restart <= 0 ) A checkpoint is NEVER written in the PDEP loop. Restart will not be possible.

trev_pdep

Type	float
Default	0.001
Description	Absolute convergence threshold for PDEP eigenvalues.

trev_pdep_rel

Type	float
Default	0.1
Description	Relative convergence threshold for PDEP eigenvalues.

tr2_dfpt

Type	float
Default	1.e-12
Description	Convergence threshold in DFPT. Note that in the first PDEP iterations a reduced threshold for DFPT could be used by the code in order to speed up the computation.

l_kinetic_only

Type	bool
Default	False
Description	If (True), then only the kinetic term in the Hamiltonian is kept.

l_minimize_exx_if_active

Type	bool
Default	False
Description	If (True), then the exact-exchange term in the Hamiltonian is computed with the cutoff of the wavefunction.

l_use_ecutrho

Type	bool
Default	False
Description	If (True), then the eigenpotentials are represented with ecutrho instead of ecutwfc.

qlist

Type	list of int
Default	[1,2,…,number of q-points]
Description	List of q-points to compute.

wfreq_control

wfreq_calculation

Type	string
Default	“XWGQ”
Description	Available options are: “XWGQ” : Compute the QP corrections. “XwGQ” : Compute the QP corrections, restart from an interrupted / just read W run. “XwgQ” : Compute the QP corrections, restart from an interrupted / just read G run. “X” : Compute the HF corrections. “XWO” : Compute the optical properties. “XWGQP” : Compute the QP corrections, and plot spectral functions. “XWGQOP” : Compute all.

n_pdep_eigen_to_use

Type	int
Default	dynamically set to match the number of electrons
Description	Number of PDEP eigenvectors to use in Wfreq. They are read from previous Wstat run. This value cannot exceed n_pdep_eigen (defined in wstat_control) and is used to check the convergence of the calculation.

qp_bandrange

Type	2-dim list of int
Default	[1,2]
Description	Compute the QP corrections from band qp_bandrange[0] to band qp_bandrange[1].

macropol_calculation

Type	string
Default	“N”
Description	Available options are: “N” : None. Choice valid for isolated systems. “C” : Include long-wavelength limit. Choice valid for condensed systems.

n_lanczos

Type	int
Default	30
Description	Number of Lanczos chains.

n_imfreq

Type	int
Default	128
Description	Number of frequecies used to sample the imaginary frequency axis in the range [0,ecut_imfreq].

n_refreq

Type	int
Default	272
Description	Number of frequecies used to sample the real frequency axis in the range [0,ecut_refreq].

ecut_imfreq

Type	float
Default	dynamically set to the cutoff energy of the density, read from the ground state
Description	Cutoff for the imaginary frequencies (in Ry).

ecut_refreq

Type	float
Default	2.0
Description	Cutoff for the real frequencies (in Ry).

wfreq_eta

Type	float
Default	0.05 / 13.6056980659
Description	Energy shift of the poles (in Ry).

n_secant_maxiter

Type	int
Default	1
Description	Maximum number of iterations in the secant solver.

trev_secant

Type	float
Default	0.05 / 13.6056980659
Description	Convergence energy threshold (in Ry) for the secant solver.

l_enable_lanczos

Type	bool
Default	True
Description	If (False), then Lanczos solvers are turned off.

l_enable_gwetot

Type	bool
Default	False
Description	Deprecated parameter.

o_restart_time

Type	float
Default	0.0
Description	Available options are: If ( o_restart_time == 0 ) A checkpoint is written at every iteration of the W and G loops. If ( o_restart_time > 0 ) A checkpoint is written every o_restart_time minutes in the W and G loops. If ( o_restart_time < 0 ) A checkpoint is NEVER written in the W and G loops. Restart will not be possible.

ecut_spectralf

Type	2-dim list of float
Default	[-2.0,1.0]
Description	Energy cutoff (in Ry) for the real frequencies. Used when wfreq_caculation contains the runlevel “P”.

n_spectralf

Type	int
Default	204
Description	Number of frequecies used to plot the spectral function (runlevel “P”), sampling the interval [ecut_spectralf[0],ecut_spectralf[1]].

westpp_control

westpp_calculation

Type	string
Default	“R”
Description	Available options are: “R” : Output rho, the electronic density. “W” : Output the electronic wavefunctions. “E” : Output the eigenpotentials. “S” : Output the screened exchange constant. “D” : Output the dipole matrix elements.

westpp_range

Type	list of int
Default	[1,2]
Description	Range for W, E, S, and D run.

westpp_format

Type	string
Default	“C”
Description	Available options for the output fortmat are: “c” : Cube. “x” : Planar average yz. “y” : Planar average xz. “z” : Planar average xy. “s” : Spherical average.

westpp_sign

Type	bool
Default	False
Description	If (True), then the sign of the wavefunction/eigenpotential is kept in the output file.

westpp_n_pdep_eigen_to_use

Type	int
Default	1
Description	Number PDEP eigenpotentials to read/use.

westpp_r0

Type	3-dim list of floats (a vector)
Default	[0.0, 0.0, 0.0]
Description	Position of the center (in a.u.) for spherical average plot.

westpp_nr

Type	int
Default	100
Description	Number of points in the spherical average plot.

westpp_rmax

Type	float
Default	1.0
Description	Max radius (in a.u.) for the spherical average plot.

westpp_epsinfty

Type	float
Default	1.0
Description	Macroscopic relative dielectric constant. Used in the “S” runlevel.

server_control

document

Type	jsonizable object
Default	“{}”
Description	The document is serialized into a JSON string and passed to the server (see West/Pytools/west_clientserver.py).